Valid Dumps D-PVM-OE-01 Questions & D-PVM-OE-01 Exam Questions And Answers

Today is the right time to advance your career. Yes, you can do this easily. Just need to pass the D-PVM-OE-01 certification exam. Are you ready for this? If yes then get registered in EMC D-PVM-OE-01 certification exam and start preparation with top-notch Pass4sures D-PVM-OE-01 Exam Practice questions today. These EMC D-PVM-OE-01 questions are available at Pass4sures with up to 1 year of free updates.

EMC D-PVM-OE-01 Exam Syllabus Topics:

Topic	Details
Topic 1	PowerMax Family Local and Remote Replication Concepts: This section of the exam measures the skills of Backup and Recovery Specialists and covers the features and functionalities of TimeFinder SnapVX. Candidates must differentiate between SnapVX snapshots and clones while understanding their role in data protection. One key skill assessed is comparing the use cases of snapshots and clones.
Topic 2	Unisphere for PowerMax 10 Implementation and Administration: This section of the exam measures the skills of System Administrators and covers the implementation and management of Unisphere for PowerMax. Candidates must understand the installation process, post-installation tasks, and interface navigation to efficiently operate the platform. One key skill evaluated is setting up Unisphere for PowerMax.
Topic 3	PowerMax Family Monitoring and Workload Planning: This section of the exam measures the skills of Performance Analysts and focuses on monitoring storage environments and workload planning using Unisphere for PowerMax. Candidates must understand how to track performance metrics, detect issues, and optimize workloads to enhance storage efficiency. One key skill tested is monitoring storage health through Unisphere.
Topic 4	PowerMax Family Storage Provisioning: This section of the exam measures the skills of Storage Administrators and covers the architecture, configurations, and management of the PowerMax family. Candidates must understand system models, port and device management, and provisioning methods using Unisphere for PowerMax. They are expected to perform service level-based provisioning and allocate storage through auto-provisioning groups. One key skill assessed is configuring storage using Unisphere for PowerMax.
Topic 5	PowerMax Family Business Continuity Administration: This section of the exam measures the skills of Disaster Recovery Engineers and focuses on replication technologies used for business continuity. Candidates must perform SnapVX and Clone operations using Unisphere for PowerMax and understand Symmetrix Remote Data Facility (SRDF) replication. They must also execute SRDF operations using Unisphere and SYMCLI.
Topic 6	Solutions Enabler 10 Implementation: This section of the exam measures the skills of Infrastructure Engineers and focuses on the fundamentals of Solutions Enabler. Candidates must understand its installation, upgrade processes, gatekeeper management, and daemon functions across different platforms. One crucial skill tested is managing Solutions Enabler daemons.

>> Valid Dumps D-PVM-OE-01 Questions <<

D-PVM-OE-01 Exam Questions And Answers | D-PVM-OE-01 Pdf Files

The Pass4sures is a leading platform that has been helping the Dell Technologies PowerMax Operate (D-PVM-OE-01) exam candidates in exam preparation and boosting their confidence to pass the final D-PVM-OE-01 exam. The Pass4sures is offering real, valid, and updated Dell Technologies PowerMax Operate (D-PVM-OE-01) practice questions. These Dell Technologies PowerMax Operate (D-PVM-OE-01) exam questions are verified by EMC D-PVM-OE-01 exam trainers. They work closely and check all Dell Technologies PowerMax Operate (D-PVM-OE-01) exam dumps one by one and they ensure the best possible answers to Dell Technologies PowerMax Operate (D-PVM-OE-01) exam dumps.

EMC Dell Technologies PowerMax Operate Sample Questions (Q52-Q57):

NEW QUESTION # 52
A company is setting up a multi-tenant environment where multiple departments share the same storage array with SID 1762. The IT department requires 2 TB of storage to be available on the ESXi1 host. Use
"ESXi1_SG" for the storage group name, create a port group with Dir- Ports "OR-1C:0 and OR-2C:0," and leave all other settings at their default.

Using the simulator, provision the storage required with a single volume using auto-provisioning groups.

Answer:

Explanation:
See the explanation for step by step solution.
Explanation:
We need to provision 2 TB of storage to the ESXi1 host on a PowerMax array (SID 1762) using Unisphere, in a multi-tenant environment. We'll use auto-provisioning with the following specifics:
* Storage Group Name:ESXi1_SG
* Port Group:(A new port group with Directors OR-1C:0 and OR-2C:0)
* Volume Size:2 TB (single volume)
* Other Settings:Default
Here are the step-by-step instructions, tailored for the Unisphere simulator as described in the question:
Steps:
1. Launch the Simulator and Navigate to Storage Groups
* Open Unisphere for PowerMax in your web browser.
* You should already be logged in to the simulator, with the PowerMax array with SID 1762.
* In the left-hand navigation pane, click onStorage>Storage Groups.
2. Initiate Storage Group Creation
* Click theCreatebutton (likely a plus "+" icon) in the Storage Groups section to start the Create Storage Group wizard.
3. Name the Storage Group
* In the "Create Storage Group" wizard:
* Storage Group Name:Enter ESXi1_SG.
* Enable FAST/Service Level:Do not check this option, as we are leaving all other settings at their default.
* ClickNextorContinue(the exact wording might vary).
4. Add Volumes
* Ensure"Create new volumes"is selected.
* Number of Volumes:Enter 1.
* Volume Size:
* Enter 2.
* Select TB from the dropdown for the unit.
* ClickNext.
5. Create the Port Group
* You should now be on the "Connectivity" or "Host" step, where you will add a new port group.
* Select "Create Port Group"
* Port Group Name:Give the new port group a name. You can use something descriptive like
"ESXi1_PG," or any name that follows your organization's naming conventions.
* Select Ports:
* Find and select the following Directors and ports from the list of available ports:
* OR-1C:0
* OR-2C:0
* Note:The simulator may not allow you to highlight the exact director ports as in a production environment. It will likely display all directors and ports under the selected array. Just ensure they are selected as part of the port group.
* ClickNext.
6. Add host to the Masking View
* Select "Add Host"
* Select "Create New Host"
* Host Name:ESXi1
* Initiators:You don't have specific initiators to add in this simulation, so you can skip this part or add any from the available options. This is because we are working within a simulated environment.
* ClickNext
7. Review and Create
* You'll be presented with a summary page that shows:
* Storage Group: ESXi1_SG
* Volume: 1 x 2 TB volume
* Port Group: (The new port group you created with OR-1C:0 and OR-2C:0)
* Host: ESXi1
* Carefully review all the settings to make sure they are correct.
* ClickRun NoworFinish(or similar wording) to create the storage group, volume, port group, and masking view.
8. Verification (Optional)
* After the operation completes, you can verify the results:
* Go back to theStorage Groupslist. You should see the ESXi1_SG storage group.
* Click on ESXi1_SG to view its details. You should see the 2 TB volume and the associated host (ESXi1) and port group.
* You can also navigate toHosts>Port Groupsto verify that the new port group was created correctly.
* Finally, you can navigate toHosts>Masking Viewsto verify that a masking view was created correctly.

NEW QUESTION # 53
What are the two configuration rules that apply to SRDF groups and connections during Non-Disruptive Migrations'?

A. Two DM RDF groups are created per SG migration session
B. RF and RE ports are supported, with RF ports being selected if both types are available
C. The source and target arrays are at most one hop away from the control host
D. A single array cannot have multiple DM RDF groups
E. DM RDF groups are configured with a minimum of one path

Answer: C,E

Explanation:
Step by Step Comprehensive Detailed Explanation:
Non-Disruptive Migration (NDM) is a feature in PowerMax that allows you to migrate data between storage arrays without any downtime or disruption to host applications. During NDM, SRDF (Symmetrix Remote Data Facility) is used to replicate data between the source and target arrays. Here are the configuration rules that apply to SRDF groups and connections during NDM:
* A. The source and target arrays are at most one hop away from the control host:The control host, which manages the NDM process, must have direct connectivity to both the source and target arrays.
This ensures efficient communication and control during the migration.
* E. DM RDF groups are configured with a minimum of one path:SRDF groups used for NDM (DM RDF groups) must have at least one active path between the source and target arrays. This ensures that data can be replicated continuously during the migration.
Why other options are incorrect:
* B. Two DM RDF groups are created per SG migration session:This is not a strict requirement. The number of DM RDF groups may vary depending on the configuration and the specific NDM operation.
* C. RF and RE ports are supported, with RF ports being selected if both types are available:While RF and RE ports are supported for SRDF, there's no specific preference for RF ports during NDM. The choice of ports depends on the overall network configuration and availability.
* D. A single array cannot have multiple DM RDF groups:An array can have multiple DM RDF groups if needed for different NDM operations or configurations.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide provides an overview of NDM and its requirements, including information about SRDF configuration.
* Dell Solutions Enabler 10.0.0 CLI User Guide:This guide provides detailed information about SRDF commands and configuration options, which are relevant for NDM operations.

NEW QUESTION # 54
What is the maximum capacity per array in a PowerMax 8500?

A. 8 PBe
B. 24 PBe
C. 20 PBe
D. 18 PBe

Answer: B

Explanation:
Step by Step Comprehensive Detailed Explanation:
The PowerMax 8500 is a high-end storage array designed for enterprise environments with demanding capacity requirements. The maximum capacity per array in a PowerMax 8500 is24 petabytes effective (PBe)
.
This means that after considering data reduction technologies like deduplication and compression, the array can store up to 24 petabytes of usable data.
Why other options are incorrect:
* A. 8 PBe, B. 18 PBe, C. 20 PBe:These values are lower than the actual maximum capacity of the PowerMax 8500.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell PowerMax 8500 Hardware Information Guide:This guide provides detailed technical specifications for the PowerMax 8500, including its maximum capacity. You can find this document on the Dell Support website by searching for "PowerMax 8500 Hardware Information Guide."
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a general overview of the PowerMax family, including the 8500 model and its key features and capabilities.

NEW QUESTION # 55
Where is the automatic backup feature for the Solutions Enabler Group Name Services database set?

A. SYMAPI variable
B. SYMAPI options file
C. Daemon options file
D. SYMCLI environment variable

Answer: A

NEW QUESTION # 56
How is the Host I/O served after running the Non-Disruptive Migration cutover command?

A. Host I/O sent to the old storage system is replicated to the new storage system using SRDF Pass- Through
B. Host I/O sent to the new storage system is replicated to the old storage system using SRDF Pass- Through
C. Host I/O is sent only to the old storage system and replicated to the new storage system using SRDF/S
D. Host I/O is sent only to the new storage system and replicated to the old storage system using SRDF/S

Answer: A

NEW QUESTION # 57
......

It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related D-PVM-OE-01 certification is the best way to show our professional ability, however, the D-PVM-OE-01 Exam is hard nut to crack but our D-PVM-OE-01 preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the D-PVM-OE-01 exam.

D-PVM-OE-01 Exam Questions And Answers: https://www.pass4sures.top/Storage-Administrator/D-PVM-OE-01-testking-braindumps.html

Roy Stone Roy Stone

Biography

Valid Dumps D-PVM-OE-01 Questions & D-PVM-OE-01 Exam Questions And Answers

EMC D-PVM-OE-01 Exam Syllabus Topics:

D-PVM-OE-01 Exam Questions And Answers | D-PVM-OE-01 Pdf Files

EMC Dell Technologies PowerMax Operate Sample Questions (Q52-Q57):

Site Navigation